Does your 1965 or 1966 Ford Mustang have an ugly 70's era AM FM Cassette Radio ? Did you remove the radio only to find the dash had been molested, metal peeled back & opening widened, holes drilled in the metal dash ? A professional repair means removing the soft vinyl pad, all the wires behind the dash, welding in a new metal plate & repainting the entire dash to match. Estimates are close to $900 for a professional job.

Instead you can install one of our Dash Repair cover plates.The cover is precision cut from matte black Wilson board. It has a textured finish that closely duplicates the crinkle pattern found on the instrument bezel and on the glove box door (the pattern is a little finer).

There are no tools required to install . It slips over the existing radio knobs, and can be held in place with a dab of silicone caulk. The Mustang repair panel is easily removed if you ever want to do a professional cut & weld repair.

The plates are all black & have an oval cut at each corner, and are supplied with 1/8 inch wide chrome, adhesive backed pin stripe for the border. The pinstripe is applied & trimmed with a sharp scissors or razor knife, so please be handy if you intend to dress the edge.

I had the template made by a master cabinet maker to use on my own 1965 Mustang Fastback. I have had other gear-heads in the car and they were oblivious to the fact a repair had been made at all !

To order follow this link.